Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Framingham?
Garage door repair in Framingham typically costs $150 to $600, depending on what failed and how many parts are involved. A single snapped spring usually runs $180 to $340, a frayed cable $130 to $250, and an opener repair $120 to $320. Simple fixes like rollers or a track knock-out can land under $200, while a bent bottom panel or a dead opener with a replacement sent from the factory pushes toward the top of that range.
These are typical estimated ranges for the Framingham market, not a quote. The written estimate we give you after looking at the door sets the final price, and it doesn’t change once the work is approved.
Key Takeaways
- Most garage door repairs in Framingham fall between $150 and $600, with springs, cables, and openers covering the most ground.
- Springs are the highest-risk part of the door. A trained technician should handle them, not a general handyman.
- Framingham’s cold winters and humid summers work on steel, wood, and springs all year, and that wear explains a lot of what we’re called out for.
- Diagnosis usually comes before the repair. If the door is stuck open or won’t close, call (877) 665-1930 and we’ll get a technician out on our emergency line.
- Garage doors are all we do, on eight of the most common brands on the market.
Garage Door Repair Cost Breakdown (2026)
Here’s what the common jobs run in Framingham this year. Each line is a typical estimated range for a standard residential door. Two-car doors, custom sections, and anything that needs special-order parts can move the number, which is why we confirm in person before turning a wrench.
| Repair | Typical Estimated Range | Notes |
|---|---|---|
| Garage door repair (general) | $150 – $600 | Depends on the part and how much of the door has to come apart |
| Spring replacement (one spring) | $180 – $340 | Per spring. A matched pair is usually replaced together and runs about twice that |
| Cable repair | $130 – $250 | Frayed or popped cables; usually both sides get checked |
| Opener repair | $120 – $320 | Motor, logic board, travel limits, or a stripped gear |
| Opener installation | $250 – $550 | Replacing an existing opener; new wiring or outlets can add to it |
| Panel replacement | $250 – $500 | One section replaced to match the rest of the door |
| Track realignment | $120 – $240 | Bent or knocked-out track after a bump |
| Roller replacement | $110 – $220 | Worn or seized rollers; usually done as a set |
| New door installation | $700 – $2200 | Full replacement including removal of the old door |
What pushes a repair toward the top of its range? A bent bottom panel needs a matching section, and matching sections cost more than generic hardware because the manufacturer has to produce that exact profile in that exact color. An opener that’s failed internally on an older unit is often worth replacing rather than repairing, so the line you’re looking at might be $250 – $550 for installation instead of $120 – $320 for a repair. When the door itself has rusted or rotted to the point where three or four separate parts are failing at once, a full replacement starts to make more sense than a patch.
What keeps a repair toward the bottom? A single roller or a track that a technician can straighten without removing the door. Those are the jobs we see most often, and they’re usually quick.
What Affects Garage Door Repair Pricing in Framingham
Every door is a little different, and so is every house. A few things move the price more than others:
- Which brand is on your door. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we’re familiar with how each one is built. Parts availability is the real cost driver here. A common Genie or LiftMaster opener part is a stock item; a discontinued logic board for an older unit means a different conversation, usually about replacing rather than chasing a rare part.
- Cold, wet Framingham weather. A Massachusetts winter loads the door with freezing moisture and road grit that blows in off the driveway, and the thaw that follows works on steel tracks and hinges. Springs take a beating in the cold months because the metal is cycling between very cold and heated garage temperatures. That pattern shows up repeatedly in the calls we take around Framingham between December and March.
- The age and type of door. A wood door that’s been on a house for decades may have sagging stiles, swollen panels, and hinge screws that no longer bite. A recent steel door usually needs less. Older wood doors often take longer to work on because the parts don’t come apart cleanly.
- Whether it’s one spring or a matched pair. Springs usually fail in pairs because they’ve lived the same life. We price each one separately so you can see exactly what you’re paying for.
- Access and site conditions. A door that’s been knocked off track, or one with a car parked right up against it, takes more time to secure safely before work starts. Detached garages and tight residential driveways around Framingham add some hassle to moving a new door section into place.
- Time of day. Emergency calls for a door stuck open overnight cost more than a scheduled repair. We run a dedicated emergency garage door service for exactly those situations, and we’ll tell you up front what it involves on the phone.
Is It Cheaper to Repair the Door or Replace It?
Repair is cheaper in most cases. A $180 – $340 spring replacement or a $120 – $240 track realignment on a door that’s otherwise solid is almost always the right call. Replacement starts to make sense when the door itself is failing structurally in several places at once or when parts are no longer available for an older unit.
- Repair when the door panels, stiles, and frame are sound and only the hardware has failed. Most of the jobs we quote fall into this bucket.
- Replace when three or more panels are damaged, the door has settled badly out of square, or the hardware is obsolete. A new door installation runs $700 – $2200, so it’s a bigger number, but it ends the cycle of fixing one part and waiting for the next to go.
We’ll give you both numbers when it’s close. Call (877) 665-1930 and we’ll look at the door with you and tell you honestly which one fits.
How Much Do Garage Door Springs Cost in Framingham?
Spring repair in Framingham typically costs $180 to $340 for one spring. Because springs usually fail together, a matched pair is replaced as a set and runs about twice that range. If you’ve heard a loud bang from the garage and the door won’t lift, that’s the sound of a torsion spring breaking, and the door should not be used until it’s fixed.
Springs are the most dangerous part of a garage door. The torsion spring above the door is under high tension, and a replacement needs the correct winding bars, the right wire size, and a technician who knows how many turns that door needs. Cables and brackets are also under tension. This is not a job for a homeowner with a ladder and a YouTube video, and it isn’t a job for a general handyman either. We handle spring work specifically because it’s the highest-risk repair on the door and the one most often done wrong.
If the door is stuck open or won’t close after a spring failure, that’s an emergency. Call (877) 665-1930 and we’ll get a technician out; estimates are free.
How Much Does an Opener Repair or Replacement Cost in Framingham?
Opener repair in Framingham typically costs $120 to $320. If the opener needs to be replaced instead, installation runs $250 to $550. The breakdown depends on whether the motor, the logic board, the safety sensors, or the drive mechanism has failed.
Most opener problems fall into a few buckets:
- The door goes up a foot and stops. That’s usually a travel-limit or sensor issue, and it’s a repair, not a replacement.
- The opener runs but the door doesn’t move. That points to a stripped gear or a broken drive coupler.
- The opener is dead on an older unit. Logic boards for discontinued models are hard to source, so a new opener often makes more sense.
- The remotes don’t work. Sometimes it’s a battery, sometimes it’s a board.
Because we work on LiftMaster, Chamberlain, Genie, and Craftsman openers regularly, we know which problems are worth fixing and which ones are throwing money at a unit that’s near the end. An opener replacement is a same-day job in most cases, and we’ll walk you through the model options before we start.
How to Save on Garage Door Repair
There aren’t coupons here, but there are real ways to keep the bill down.
- Get the free estimate first. We’ll come out and tell you what’s actually wrong. That costs nothing, and it keeps you from paying for a part you don’t need. Call (877) 665-1930 to schedule one.
- Fix one thing before it becomes three. A worn roller that’s binding on the track wears out the hinge, then the panel. Catching a small repair early is the cheapest version of this whole page.
- Lubricate the moving parts once a season. A proper garage door lubricant on hinges, rollers, and the spring coils keeps things moving and slows wear. It won’t stop a spring from breaking, but it reduces the friction that wears out the rest of the hardware.
- Keep the tracks clean. Grit and salt tracked in from the driveway gets into the tracks and grinds the rollers down. A wipe-down with a damp cloth once in a while is worth the two minutes.
- Don’t try spring work yourself. The cheapest repair on this page is the one done correctly the first time. A DIY spring job that goes wrong costs more than the professional version, and the injury risk is real.
- Know when to stop repairing. If a door needs three separate repairs in one visit, ask about replacement. A new door installation at $700 – $2200 can be the better long-term number, and we’ll say so when it applies.
Can You Fix My Garage Door the Same Day?
Yes, in most cases. Same-day repair is the norm for springs, cables, rollers, and track realignment on a standard residential door. We keep a dedicated emergency line for doors that are stuck open overnight, won’t close, or have a car trapped inside. Call (877) 665-1930 and describe what the door is doing. If we can get a technician out that day, we will.
For a full new door installation, we typically need more notice because the door has to be measured and ordered. If you’re planning a replacement, a call now gives us time to line everything up before the door arrives.
Do You Work on My Brand of Door or Opener?
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Those eight brands cover the most common systems on Framingham homes, so there’s a good chance we already know yours. We’re not a dealership and we’re not locked into one manufacturer; we work on the door and opener you already have, and we know the parts those systems take.
Garage doors are all we do. No plumbing, no HVAC, no general handyman work. Every technician works on doors and openers day in and day out, and our technicians have up to 12 years of experience in this trade. When a door needs repair, opener work, spring replacement, or a full install, you’ve reached the right people for the whole job.
What Does a Full Garage Door Installation Cost in Framingham?
A new door installation in Framingham typically runs $700 to $2200, including removal and haul-away of the old door. The range is wide because door size, insulation, material, and window inserts all move the price. A basic single-car steel door sits at the lower end; a two-car insulated door with windows sits at the upper end.
We also install openers to go with new doors, which is where the $250 – $550 range for opener installation comes in. If you’re replacing the door, it’s often worth checking whether the existing opener is still a good match for the new door’s weight and balance. We’ll check while we’re on site.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Framingham?
Garage door repair in Framingham typically costs $150 to $600. A spring replacement is $180 – $340 for one spring, a cable repair is $130 – $250, and an opener repair is $120 – $320. The written estimate after we see the door is the final price. Call (877) 665-1930 for a free estimate.
Is it cheaper to repair or replace a garage door in Framingham?
Repair is cheaper in most cases. A repair runs $150 – $600, while a full replacement runs $700 – $2200. Repair is the right call when the panels and frame are sound; replacement makes sense when multiple panels are damaged or parts are no longer made. Call (877) 665-1930 and we’ll quote both if it’s close.
How much does a garage door spring replacement cost in Framingham?
One spring is typically $180 to $340 in Framingham. A matched pair is usually replaced together and costs about twice that. Springs are under high tension and should only be handled by a trained technician. Call (877) 665-1930 for an estimate.
Can you come today if my garage door is stuck?
Yes, in most cases. We run a dedicated emergency garage door service for doors that are stuck open, won’t close, or have a vehicle trapped inside. A same-day visit is the goal for urgent calls. Call (877) 665-1930 and describe what the door is doing.
How much does a new garage door opener cost in Framingham?
Opener installation typically runs $250 to $550, and opener repair runs $120 – $320. Whether to repair or replace depends on the age and availability of parts for your unit. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, so we can tell you which one makes more sense. Call (877) 665-1930 for a free estimate.
Why did my garage door spring break in the first place?
Springs break because they’ve cycled a fixed number of times; a typical cycle count is somewhere in the tens of thousands, and Framingham’s cold winter temperatures accelerate that wear. A spring that’s been in service for years is simply going to fail eventually, and the loud bang is the sound of it letting go. Call (877) 665-1930 and we’ll replace it safely.
When to Call a Specialist
If the door is stuck open, if it won’t close, or if you’ve heard a spring break, call (877) 665-1930. We offer free estimates, upfront pricing, and same-day service on most repairs. Our technicians have up to 12 years of experience, and we work on eight of the most common door and opener brands on the market. For a broken spring, a dead opener, a wrecked track, or a full new door, see our garage door repair page for the service details, and check Framingham Garage Door Repair Pros for the full scope of what we do. Garage doors are all we do, and we’d be glad to take a look at yours.
Pricing reflects the Framingham market as of 2026. Framingham Garage Door Repair Pros offers free estimates – call (877) 665-1930.
Written by the team at Framingham Garage Door Repair Pros.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Ramon Flores"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Ryan Whitaker"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Christine Nguyen