Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Framingham Homeowners
A broken spring turns a working garage door into a dead weight you shouldn’t force. That’s why we treat spring repair as priority work: call (877) 665-1930 and we’ll aim to get to your Framingham home the same day. Our technicians have up to 12 years of experience, and springs are one of the most dangerous parts of a garage door to touch, so this isn’t a job for a generalist. Garage doors are all we do. We work on the systems Framingham homes actually have – Amarr, Wayne Dalton, Craftsman and Raynor among them – and we quote a written price before anything starts. No surprise invoice when we’re done.
What Our Garage Door Spring Repair Service Includes
Spring work covers more than swapping a coil. Here’s what each part of the job means, and what we actually do when we’re on site in Framingham.
Torsion Spring Replacement
A torsion spring is the horizontal coil mounted above your door, on the header. It does most of the lifting on a modern sectional door. When it snaps – usually with a loud bang – the door becomes almost impossible to raise by hand, and forcing it can damage the panels, tracks and opener. We replace torsion springs as matched pairs, because a single new spring alongside an old one means uneven tension and a second failure before long. For parts and labour on one spring, a typical estimated range is in the table further down; a pair is about double, since both springs are usually replaced together.
Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of older single-car doors, and they stretch rather than twist. When one lets go it can whip toward the garage wall, which is why safety cables matter so much. We replace extension springs in pairs and check the mounting hardware and cables while the door is apart. If your Framingham garage has the older side-spring setup, we’ll tell you honestly whether a conversion to torsion makes sense for your door’s weight and use.
Broken Spring Repair
A broken spring is the call we get most often, and the symptom is unmistakable: a bang, then a door that won’t lift or one that slams shut. We remove the broken coil safely, check both springs and the hardware around them, and replace with springs rated for your door’s weight. We don’t reuse a spring that’s already stretched or rusted, because a tired spring is the one most likely to fail next. This is high-tension work – we handle it with proper winding bars and keep everyone clear of the door while it’s under load.
Spring Adjustment
Not every spring problem is a break. Sometimes the door is heavy, creeps down on its own, or opens unevenly because the tension is off. Spring adjustment corrects that balance so the door lifts smoothly and the opener isn’t fighting a door that outweighs it. We check the door’s balance by hand before and after, and re-test the opener’s travel and force settings so nothing gets strained. If your door feels heavy to lift by hand, that’s worth a look before a spring fails outright.
Safety Cable Installation
On extension-spring doors, a safety cable runs through the middle of the spring so that if it breaks, the spring stays contained instead of flying. Many older doors in Framingham were built without them. We install safety cables as part of any extension spring replacement, and we’ll add them to an existing setup where they’re missing. It’s a small part of the job that makes a real difference to how safe the door is when a spring finally does let go.
Spring Inspection
Springs give warning signs before they fail, and a proper inspection catches them early. We look for gaps in the coil, rust, sagging, and the tell-tale stretch that comes with age, then measure whether the spring still matches the door’s weight. If everything is sound, we’ll tell you so and leave it alone. If a spring is on its way out, you’ll know before it strands your car. This is also the right time to look at the cables, rollers and hinges at the same time from our Framingham Garage Door Repair Pros team.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
The spring you need depends on the door and opener already on your home. We service Amarr doors and know how their panel weights and hardware settle over time, which matters when you’re matching spring tension to the door. We also work on Wayne Dalton systems, including the torsion setups that show up on their sectional doors. Getting the spring rated correctly for the door’s weight is what keeps everything in balance.
Our technicians also handle Craftsman and Raynor equipment, and we know where those systems tend to wear – the springs, the cables, the rollers that carry the load. We can also take on garage door spring repair for homes further out, and we’re fluent across LiftMaster, Chamberlain, Genie and Clopay too. Whether you have Craftsman or any other make, we can help.
Signs You Need Garage Door Spring Repair Right Now
- A loud bang from the garage. A torsion spring typically snaps with a sharp crack that’s hard to miss. If you heard it and the door suddenly won’t lift, the spring has broken – stop forcing the door and call us.
- The door won’t lift, or lifts a few inches and stops. A door that feels like dead weight usually has a failed spring rather than a motor problem. Running the opener against a broken spring can burn out the motor too, so don’t keep testing it.
- A visible gap in the spring coil. Look at the torsion spring above the door, or the side springs on an older setup. If you can see a clean break in the coil, it needs replacing before the door can be used safely.
- The door feels very heavy by hand. With the opener disengaged, a balanced door should lift with light effort from a mid position. If it’s a struggle, the spring tension is off or the spring is failing.
- The door slams shut or creeps down. A door that falls rather than lowers gently, or drifts down on its own, is out of balance. That’s a warning sign the spring has lost its tension.
Our Garage Door Spring Repair Process – Step by Step
- 1
We ask what happened on the phone. When you call, we ask about the symptom – the bang, the heavy door, the slamming – so we arrive prepared and can tell you what the job likely involves. It also means we bring the right springs for the door’s type.
- 2
We diagnose before we quote. On site, we inspect both springs, measure the coil, check the door’s balance and look at the cables, rollers and opener. A worn cable often travels with a failing spring, and we’d rather find it now than have you call back next week.
- 3
We give you a written price first. You get the estimated range and the final written quote before any work starts. The price is agreed up front, so the invoice you get is the one we quoted. Nothing starts until you say go.
- 4
We replace springs as a pair, safely. Using proper winding bars, we unwind the old springs under control, fit new ones rated for your door’s weight, and adjust the tension so the door balances. On extension springs, safety cables go in at the same time.
- 5
We test and walk you through it. We cycle the door, check the opener’s settings, and confirm it lifts and lowers smoothly by hand and by motor. Then we show you what we did and what to keep an eye on.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Framingham?
Spring repair in Framingham typically runs $180 – $340 for one spring, and that’s an estimated range, not a fixed price. Because springs are usually replaced in pairs, a matched pair is about double that range – most jobs replace both at once. A typical broken spring repair falls in the middle of the range, while a torsion replacement with heavier springs for a double-wide door sits toward the top. If your job also needs a new cable or rollers, those are separate line items, quoted clearly before we start.
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the one-spring range |
| Cable Repair | $130 – $250 |
| Spring Adjustment | Quoted on inspection |
What moves the price: the type of spring (torsion versus extension), the door’s size and weight, how many springs need replacing, and whether cables or hardware need attention at the same time. To avoid overpaying, get the price in writing before work starts and ask what’s included – old spring removal, new springs, tension adjustment and testing should all be in the quote. Our free estimate spells out each line, and the written estimate sets the final price.
Garage Door Spring Repair Near Framingham – Our Service Area
We take spring repair calls across the Framingham area and into the surrounding towns – Ashland, Cochituate, Natick, Southborough and Cordaville to the east, and Sudbury, Wayland and Sherborn to the north and west. Our garage door spring repair also covers homes further out toward Holden and Sterling. Typical response times depend on where you are and how busy the day is, but we aim to reach urgent calls the same day. Call (877) 665-1930 and we’ll give you an honest window.
Serving Framingham, MA – Our Local Coverage Area
We serve Framingham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Framingham
Garage door spring repair is the replacement or adjustment of the springs that counterbalance your door’s weight, letting the opener lift it smoothly. A torsion spring sits above the door, while extension springs run along the side tracks. When a spring breaks or loses tension, the door becomes dangerously heavy and shouldn’t be forced. A specialist replaces the spring with one rated for your door’s weight and re-tests the balance.
Most spring replacements take about one to two hours once we’re on site, depending on whether it’s a torsion or extension setup and whether cables or hardware need attention. A straightforward broken spring swap is usually on the quicker end. If we find worn cables or a door that needs rebalancing, it can take a little longer. We’ll give you a realistic time frame when you call (877) 665-1930.
Spring repair typically runs $180 – $340 for one spring, and a matched pair is about double that range since both are usually replaced together. The final cost depends on the spring type, the door’s size and weight, and whether cables or hardware need work too. You get a written quote before we start, so the price is agreed up front. Call (877) 665-1930 for an exact quote – estimates are free.
Yes. We service Amarr, Wayne Dalton, Craftsman and Raynor equipment, along with LiftMaster, Chamberlain, Genie and Clopay. Each brand has its own spring and hardware considerations, and knowing where they wear helps us match the right spring to your door. Whether you have one of those makes or any other, we can help.
We aim to reach broken-spring calls in Framingham the same day when we can, since a dead door usually means a car that’s stuck. If your door is stuck open or won’t close, tell us when you call so we can prioritize it. Call (877) 665-1930 and we’ll give you an honest window.
Yes – we stand behind our spring work and will explain the warranty on the springs and labour when you get your quote. Ask us at estimate time and we’ll confirm what’s covered and for how long. If something isn’t right after the job, call us and we’ll make it good. Estimates are free, so there’s no pressure to book on the spot.
Clear the area around and under the door so our technician has room to work, and keep kids and pets away from the garage while we’re there. Don’t try to lift or force the door yourself, since a broken spring means the full weight is unsafe to handle. Have the garage accessible and, if you can, note whether you heard a bang or the door just got heavy – it helps us diagnose before we arrive.
Schedule Your Garage Door Spring Repair Service in Framingham Today
A broken spring stops everything, so don’t wait on it. Call (877) 665-1930 and we’ll book a free estimate, aim to reach same-day calls, and give you a written price before any work starts. Our technicians have up to 12 years of experience, every job is quoted clearly, and we work on your brand. Garage doors are all we do, and springs are the job we take most seriously.
Written by the team at Framingham Garage Door Repair Pros.